The Color LaserWriter 12/600 PS comes with 8 MB of DRAM soldered on the controller board. There are also two 72-pin DRAM SIMM slots on the board which allow expansion of the memory up to a maximum of 40 MB.

The SIMM slots accept 1 MB, 4 MB, and 16 MB 72-pin 60 ns DRAM SIMMs, 2K and 4K refresh. It is possible to mix SIMMs of different sizes in the two slots.

The table below lists the possible DRAM configurations for 1 MB, 4 MB, and 16 MB SIMMs installed in the printer.

DRAM configurations for the Color LaserWriter 12/600 PS:

SIMM slot J10	SIMM slot J11	Total Installed DRAM
4 MB	0 MB	12 MB*
4 MB	1 MB	13 MB
4 MB	4 MB	16 MB
16 MB	0 MB	24 MB
16 MB	1 MB	25 MB
16 MB	4 MB	28 MB
16 MB	16 MB	40 MB

* Shipped Configuration

Text Chart

NOTE: When installing SIMMs of different capacities, you should install the larger capacity SIMM in slot J10.

[Previous] [Top] [Next]